Grenfell- flues, chimneys and exhausts - installation and maintenance

Continuing our series of looking at the non-cladding aspects of the Grenfell Tower tragedy, we now move onto a key part of a passive fire safety strategy; flues and exhausts. A flue is quite simply a duct, pipe, or opening in a chimney to get exhaust gases from a fireplace, furnace, water heater, boiler or a generator out of the building.

Flues and chimneys, carrying hot combustion products out of buildings, can present significant health and safety risks if not installed and maintained correctly. If the risers and voids they are located in are not carefully designed, they can provide a route for fire spread. As more and more of the issues around the design, installation and inspection of large commercial and high rise residential buildings are emerging, this is yet another area that needs to be further examined.

BESA have been working with Poujoulat Chimneys, members of the British Chimney & Flue Manufacturers Association, to compose our latest Technical Bulletin, which covers flue and chimney installation and maintenance and best practice in this field.

Effective fire safety and protection means that compartmentalisation of a building is critical, especially in high rise blocks. Therefore, the integrity of compartments and fire walls has to be maintained and properly installed and any flue passing through a compartment wall or floor should have a fire rating equal to half that of the compartment wall or floor itself to prevent the spread of fire.

There are over 5,500 chimney fires in England, Wales and Scotland every year, with around 50% of these occurring between in January, February and March. The Government’s Fire Kills fire safety campaign is working to raise awareness of the issue, but it is difficult to gauge awareness amongst consumers of the importance of maintaining their heating systems, chimneys and flues.

The Grenfell tragedy has taught us that a lot needs to change if we are going to create a safe built environment. Hidden issues like flues may not be headline grabbing news, but are one of the many areas that we need to examine and fix.

Recent News

BESA and SFG20 support the UK BIM Alliance

The Building Engineering Services Association (BESA) and its widely used facilities management solution SFG20 have become affiliates of the UK BIM Alliance.

Link Continue Reading

NBS and BESA partner to join-up digital construction - Mapping Uniclass 2015 to SFG20

NBS, the leading specification platform for the construction industry, has announced its partnership with BESA (Building Engineering Services Association) to help drive digital adoption throughout the building lifecycle.

Link Continue Reading


The coronavirus crisis has created unprecedented challenges for building owners and maintainers.

Link Continue Reading

Coronavirus forces new dates for Facilities Show

Facilities Show 2020 which was originally scheduled to be staged in May 2020, will now be held at ExCeL London on 8–10 September 2020.

Link Continue Reading

Grenfell - less speed more haste - when will we learn?

Part 6 of our Grenfell series questions whether the construction teams’ views were listened to.

Link Continue Reading

Grenfell -The symptoms vs the disease - a solution

Part 4 of our series explores the difference between legislation and regulations.

Link Continue Reading

Grenfell - the symptoms vs the disease

Part 3 of the series looks at what options there are around regulations and enforcement.

Link Continue Reading

Grenfell - fire stopping systems

Part 2 of our Grenfell series - What else are we missing - looks at fire stopping systems.

Link Continue Reading

Grenfell - what else are we missing?

Part 1 of our series outlines the fire risks associated with the poor cleaning of ventilation systems.

Link Continue Reading

SFG20 launches approved provider scheme

SFG20 has launched an Approved Provider Partnership and welcomes its first company to gain approved provider status Asckey Data Services Ltd.

Link Continue Reading

Industry bodies agree single process for BIM product data

Three leading construction industry bodies have moved to clear up growing confusion over the process of standardising product information for use in Building Information Modelling (BIM).

Link Continue Reading

Industry bodies agree standard for catering maintenance

SFG20 in collaboration with CESA has launched the first ever independently verified standard for the planned maintenance of catering equipment.

Link Continue Reading

Energy efficiency could cut NHS costs by £400m

Good news for the health sector in the wake of the Carter Report as a HTM (Health Technical Memorandum) module is now available, providing maintenance schedules aligned with the requirements of the HTMs.

Link Continue Reading

70% of office workers complain about poor air quality

A new survey has found that indoor air pollution is prevalent in work places across Britain, potentially causing long-term health problems.

Link Continue Reading

SFG20 now includes schedules relating to specialist areas such as catering

26/11/2015 From today, Customiser Compliance and Service Model subscribers can access a range of Specialist Schedules covering catering, lifts & access equipment and workshop equipment.

Link Continue Reading

SFG20's Bruce Kirton presents on the importance of planned maintenance strategies

20/10/2015 Visit CIBSE's Building Performance Conference on November 3rd and 4th to hear about the benefits a planned maintenance strategy can deliver to your business.

Link Continue Reading

Primary users can now set various access rights for different users

22.07.2015 From today, Primary Users at both Customiser Compliance and Service Model levels can assign access rights to users.

Link Continue Reading

Service Model subscribers can now customise service times

24.04.15 Today we are excited to announce the launch of customisable service times for our Service Model subscribers.

Link Continue Reading

New Service Model functionality and customer website now live

12/01/2015 A streamlined user interface for Service Model users has gone live today, in addition to a new-look customer website.

Link Continue Reading

Service times now added for Service Model subscribers

1/12/14 Schedules now display the end-to-end service time to complete the tasks on an individual maintenance schedule.

Link Continue Reading

SFG20 wins government grant to develop a BIM interface

11/08/14 Enabling the automatic generation of customised maintenance solutions from BIM models and informing whole-life design decisions, with collaboration between construction and facilities management teams.

Link Continue Reading

SFG20 wins at the prestigious 2013 H&V News Awards

26/04/2013 SFG20 won in the Service and Maintenance Initiative of the Year category, being judged as "innovative" and having the potential to transform the service and maintenance sector.

Link Continue Reading